Wie man iPod Note zu Mikroprogrammaufstellung 3.0 für freies aktualisiert?

Vorbei bekanntgegeben Saad Hamid am 20. Juni 2009

ipod-touch-30Unser blog wird am Holen Ihnen das beste festgelegt und der ist genau der Grund, daß wir zuerst die Resultate der Werkzeuge prüfen, analysieren und beobachten, die wir teilen.

Letztes Jahr, versah unser blog die iPod Note Benutzer mit einer exklusiven Kerbe zu Aktualisieren Sie zu Mikroprogrammaufstellung 2.0 für freies und da wir es jetzt mit der Freisetzung von Mikroprogrammaufstellung 3.0 sehen, sind die meisten blogs in die Kopie der gleichen Anweisungen wild gegangen, ohne sie heraus zu prüfen.

Apple ist, sobald-wieder aufladeniPod Note Benutzer mit einer Gebühr von $9.99 aber uns schon wieder oben mit einer Kerbe gekommen sind, allem iPod zu helfen, Benutzer zu berühren tun es für freies und was bildet, unsere unterschiedliche Kerbe ist, das ist es auf einer realen iPod Note geprüft worden und funktioniert wirklich für iPod Note 1G und 2G.

Folgen Sie einfach den Schritten unten und bald werden Sie eine aktualisierte iPod Note mit Mikroprogrammaufstellung 3.0 absolut für freies haben.

  1. Downloaden Sie die neuesten iTunes von hier.
  2. Schließen Sie Ihre iPod Note 1G oder 2G an PC/Mac mit iTunes an.
  3. Klicken Sie an Wiederherstellung beim Halten der Verschiebung (für PC) und der Wahl (für Mac).
  4. Grasen Sie zu den Mikroprogrammaufstellung 3.0 für Ihre Vorrichtung und wählen Sie sie vor.

Sitzen Sie zurück und genießen Sie, während iTunes den Rest tut! Dort gehen Sie, taten es, ohne einen Penny sogar zu zahlen!

Downloadverbindungen für die Mikroprogrammaufstellung 3.0 werden unten zur Verfügung gestellt:

iPod Note 1G
http://tinyurl.com/sizlopedia-ipod1g-firm3-1
http://tinyurl.com/sizlopedia-ipod1g-firm3-2
http://tinyurl.com/sizlopedia-ipod1g-firm3-3

iPod Note 2G
http://tinyurl.com/sizlopedia-ipod2g-firm3-1
http://tinyurl.com/sizlopedia-ipod2g-firm3-2
http://tinyurl.com/sizlopedia-ipod2g-firm3-3

Gebrauch HJSplit (für PC) und Split&Concact (für Mac) die Teile in eine Akte verbinden. Sobald Sie die Mikroprogrammaufstellung am Ort auf Ihrem PC oder Mac downloaden, folgen Sie den Schritten oben, um iPod Note zu Mikroprogrammaufstellung 3.0 zu aktualisieren.

downloadendes btwn). You then extract just one of them to the same folder and it will use all 3 file for extraction. Open iTunes and hold Shift while clicking Resore and then click the file that has been extracted. Simple computer skills.....thanks a lot to Saad Hamid for the post.
  • Thanks. It worked nicely.
  • Va5h
    i had no problems with the steps... everything was perfectly clear to me. Works just fine =)
  • freshked
    can you helpme when i try to join the files with the joiner provided above it don't detect the files
  • Emma
    well it didnt work for me it said it wasnt compatible. i downloaded bot te one for the 1G and the 2G and neither workd for me and i have already deleted the one for the 1G
  • zac
    can someone please tell me once youve downloaded the files, and split and concat what do you do
  • Name
    put all the downloaded files in folder and extract one of the file using winrar. then you will find one new sofware update file.then go to itunes press restore while holding shift and select the extracted file.
  • zac
    im using a mac and it sounds like ur using a pc so wat would u do wen u use split and concat
  • anki
    i have the same problem! somebody please HELP! these steps are great for PC users, but how to concat the files when the Split & Concat doesn't want to??
  • Binsy
    Thank you!! I've got a 1st generation Touch and wasnt gonna pay £6 for an update that hardly changes much for my ipod.

    Just make sure the 3.0 firmware you've downloaded and re-joined finishes with .ipsw and it should work perferctly for you too.
  • zac
    what am i supposed to do once i have downloaded the files. im using split and concat. can u tell me exactly which butoons to press
  • vbnm
    i dont understand step 4. where do i browse for the firmware?
  • Name
    you guys do things way to complicated. when you download it, just choose save as and save as an ipsw file... way easier, no joining. THAT is simple computor skills.
  • zac
    i downloaded the 2g for my second gen ipod and it wont work
  • Mick
    Will the update get rid of all the apps already on the ipod??
  • jimmydeansausages
    worked like a charm. Thanks.
  • jed
    The only restore I can find is if I right click on the device name and select "Restore from Backup..." and then it brings up a menu that I can only select my ipod name and it says this will not restore ipod firmware.
    So where is the restore button that lets me pick the new firmware?
  • paulchua
    It all works perfectly! Thanks OP!


    @ Jed, had the same problem searching for it but i found it.

    After connecting your iTouch to your computer and opening itunes, click on your iTouch icon, then when a screen that says "would you like to purchase the 3.0 firmware for $9.99", just press "no thanks" or "remind me later". Then it should automatically go on the "summary" tab. Shaded in a gray should be the VERSION box, and under the "Update" button, you'll find the "Restore" button.

    Hope that helps, all the other people above never bothered answering this simple question. Haha
  • myway88
    thanks a lot
  • eggy101
    do yu have to join the parts together??
    and it takkes soo long to download them,
    do yu have to download all three parts ?
  • cclambert09
    Im shocked, this ACTUALLY WORKED!! :-D Thank you to who ever it was that made these files available for free! Now i've got the latest 3.0 software on my IPT and it's got quite a few new features compared to the 2.2version. Once again, Thank you for this!!.. -Chris, San Luis Obispo, CA
  • wakwooka
    thanks man
    it wrked for me
  • teph
    hw abt for 8G
  • Reena
    I think you're referring to the iPod capacity 8Gb. You can see if you have 1G or 2G in Settings->General->About.

    If you're tired of waiting for Rapidshare I also suggest going to SoftPedia, that's where I downloaded mine and you don't have to use HJSplit for it.
  • obito
    I did evrthg I got the 2.0 version tkx fr dat...bt I also did for the 3.0 version I got the 3files ...I put them into a single folder as u said ..I tried to extract now ..but when I do it the same 3files come out .....pliz help me
  • manny_B_8
    hi i have done evertything apart from join the files together. i am doing the 3.0 update, when i try and join the 3 files using HJsplit when i press start it says ' invalid floating operatin' somene help pleae !!!!
  • cosmotwerp
    if u want to know how to jail brake it just look at youtube it helped me with my 2nd gen its realy easy steps even a 10 yr old can do it just follo the steps and vwalla ur jailbroken hapy free stuff!
    • blog comments powered by Disqus